Details
Author Beny spol s.r.o.
Share
The clasp, which is an integral part of the earrings, plays an important role when purchasing earrings. Not every clasp suits everyone. There are clasps that are not suitable for babies.
In the case of a very sensitive and delicate earlobe, you will definitely choose a different type of clasp than, for example, a button - so that the earlobe does not suffer and breathes. If you change earrings frequently or have to take them off at work, it is a good idea to take this into account. In the case of some earring models, the clasp can be replaced on request. Some people prefer design, others functionality. so that you are not a stranger to any type of clasp, so that you can get a better idea and choose the best one, we have prepared a list of the most common ones.
The most common type of fastening, especially in Western Europe. A stud - a butterfly - is put on a smooth bar. The notch on the bar (stem) of the stud serves as a safeguard against losing the earring. From time to time, it is a good idea to check the stud and squeeze it to reduce the hole for the stem. Simple and quick handling. If you often change earrings, an ideal choice.
A very secure fastener similar to a button buckle, except that there is a thread on the rod (shank) and the balloon is screwed on like a nut. If you change earrings often, expect slower handling. From time to time during long term wear, clean the balloon, which likes to hold dirt, and screw it all the way in.
Practical and very secure fastens the most commonly used and most popular with children's earrings and earrings for babies. The hook that slides into the eyelet in the front of the earring can be bid. This locks the earring in place. Ideal for unwary baby fingers. This clasp is not suitable if the earrings are changed frequently.
A popular type of fastener also called a classic hinge or flap. The principle of the clasp is to snap the foot on the back of the earring. If the clasp does not stretch sufficiently, the clasp should be rechecked by a master jeweller. A secure clasp that does not interfere with the design of the earrings and is easy to put on and take off.
This type of elegant and very secure fastener can also be found under the name Russian or english clasp. Before putting on the earrings, however, it is necessary to practise the principle of clasping. The shank with a notch that is inserted into the hole in the back flap of the earring must be slightly raised or pushed down when removing the earrings.
Fastening otherwise known as french hook, is popular for its easy and quick handling and minimalist design. The hook is simply inserted into the hole. For extra security, it is better to secure the hook with a silicone 'stopper' or buy a golden anti-fall out button. This clasp is not suitable for little girls.
A very popular, reliable and secure clasp that does not interfere with the design of the earrings. This clasp is the only possible solution e.g. for small rings earrings that would otherwise be impossible to fit painlessly or without damaging the earring. Caution, the clasp must not be opened by force. It should be easy to open, but not spontaneously.
Clasp most commonly used for hoop earrings. The rod with a knuckle snaps into the fork or slides into the opposite part of the earring. If the bar does not have a hinge, you will have to be careful not to deform the earring by stretching it too far. The clasp is reliable and secure.
If you don't have pierced ears, the English screw is the solution. This fastening is not suitable for heavy earrings, because the principle of the screw clamp would not support the weight. Again, we consider this clasp a compromise and do not classify it as secure. However, for small earrings it is also a long term solution.
Clasp suitable for heavy earrings. The shank that pushes through the earlobe and the spring-loaded securing clips guarantee high security. Should clip if the clip causes pain when worn, the tension can be adjusted. Simple and quick handling. The clips are safe and comfortable.
The classic clip is just right for unpierced lobes. The raised surface in the upper part of the inner side of the earring and the spring-loaded clip ensure the stability of the earring on the earlobe by pressure. Beware of too much pressure which can cause headaches. We consider this clasp to be a compromise and do not classify it as secure, more for occasional wear.
Earrings with pearl or bead on pendant never take them off by holding the bead and pulling off the button. It is necessary to gently grasp the front part as close to the ear as possible, preferably by the backing under the bead, or to reach up to the shank and then remove the pendant.
.....self-important to visit from time to time goldsmith service and have any type of clasp rechecked. Sometimes you just need to pass the bar or clip, pull the button off and this will prevent the earring from being lost.
Other articles
Searching articles
Notice
